<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>What you’ll do:<ul><li>Own the development, documentation, and improvement of the loads development process</li><li>Collaborate with teams that interface with loads (aerodynamics, airframe, engine, mass properties, mechanical systems, propeller, etc.)</li><li>Responsible for providing static and fatigue loads that are directly consumable by all downstream users (airframe, engine, mechanical systems, propeller, etc.)</li><li>Responsible for providing clear documentation of loads assumptions and methods to generate traceable and repeatable analyses.</li><li>Support wind tunnel and flight test planning and execution in the areas of propeller loads, aeroelasticity, and aeromechanics, including test plan development, instrumentation and data acquisition definition, test monitoring and execution, data analysis and interpretation, and test report writing.</li><li>Participate in loads means and methods of compliance discussions with the FAA</li><li>Support preparation of certification test plans</li><li>Support ground vibration testing</li></ul>What you need:<ul><li>BS / MS in Aerospace Engineering or a related field</li><li>5+ years of experience developing processes for loads analysis and downselection for vehicles using multibody dynamics solvers</li><li>Working knowledge of structural analysis and test, including a fundamental understanding of strength, stability and fatigue failure mechanisms</li><li>Proficiency in Python and/or Matlab scripting</li><li>Familiarity with software development best practices and version control</li><li>Strong technical, written, and verbal communication skills</li><li>Ability to work in groups and individually</li><li>Experience in a fast-paced design environment</li></ul>Bonus Qualifications:<ul><li>Knowledge of aircraft, rotorcraft, and propeller certification standards (14 CFR Parts 23, 27, and 35)</li><li>Experience with structural dynamics, rotor dynamics, and vibratory loads</li><li>Experience developing FE models (NASTRAN or similar structural solvers) Experience with rotorcraft comprehensive simulation tools (such as RCAS or CAMRAD)</li><li>Experience with fixed-wing and rotorcraft aerodynamics, structures, flight dynamics, and vehicle performance</li><li>Experience in developing loads for eVTOL vehicles and/or tiltrotors, including loads for airframe components, tilting mechanisms, and propeller blades.</li><li>CAD (NX preferred)</li><li>Pilot’s license</li></ul>Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at <a href="mailto:people@archer.com">people@archer.com</a>. Reasonable accommodations will be determined on a case-by-case basis. <div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to <a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Archer is designing and developing electric vertical takeoff and landing aircraft for use in urban air mobility networks. Archer&rsquo;s mission is to unlock the skies, freeing everyone to reimagine how they move and spend time. Archer's team is based in Santa Clara, CA. To learn more, visit www.archer.com.

Loads Process Engineer

<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>What you’ll do:<ul><li>Own the development, documentation, and improvement of the loads development process</li><li>Collaborate with teams that interface with loads (aerodynamics, airframe, engine, mass properties, mechanical systems, propeller, etc.)</li><li>Responsible for providing static and fatigue loads that are directly consumable by all downstream users (airframe, engine, mechanical systems, propeller, etc.)</li><li>Responsible for providing clear documentation of loads assumptions and methods to generate traceable and repeatable analyses.</li><li>Support wind tunnel and flight test planning and execution in the areas of propeller loads, aeroelasticity, and aeromechanics, including test plan development, instrumentation and data acquisition definition, test monitoring and execution, data analysis and interpretation, and test report writing.</li><li>Participate in loads means and methods of compliance discussions with the FAA</li><li>Support preparation of certification test plans</li><li>Support ground vibration testing</li></ul>What you need:<ul><li>BS / MS in Aerospace Engineering or a related field</li><li>5+ years of experience developing processes for loads analysis and downselection for vehicles using multibody dynamics solvers</li><li>Working knowledge of structural analysis and test, including a fundamental understanding of strength, stability and fatigue failure mechanisms</li><li>Proficiency in Python and/or Matlab scripting</li><li>Familiarity with software development best practices and version control</li><li>Strong technical, written, and verbal communication skills</li><li>Ability to work in groups and individually</li><li>Experience in a fast-paced design environment</li></ul>Bonus Qualifications:<ul><li>Knowledge of aircraft, rotorcraft, and propeller certification standards (14 CFR Parts 23, 27, and 35)</li><li>Experience with structural dynamics, rotor dynamics, and vibratory loads</li><li>Experience developing FE models (NASTRAN or similar structural solvers) Experience with rotorcraft comprehensive simulation tools (such as RCAS or CAMRAD)</li><li>Experience with fixed-wing and rotorcraft aerodynamics, structures, flight dynamics, and vehicle performance</li><li>Experience in developing loads for eVTOL vehicles and/or tiltrotors, including loads for airframe components, tilting mechanisms, and propeller blades.</li><li>CAD (NX preferred)</li><li>Pilot’s license</li></ul>Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at <a href="mailto:people@archer.com">people@archer.com</a>. Reasonable accommodations will be determined on a case-by-case basis.&nbsp;<div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to&nbsp;<a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Loads Process Engineer

About the Job

About the Company

Archer

Similar Jobs

Staff Manufacturing Test Engineer

Staff Manufacturing Test Engineer

Sr. Aerodynamics Engineer, Modeling and Simulation

Sr. Aerodynamics Engineer, Modeling and Simulation

Senior Motor Manufacturing Engineer

Senior Motor Manufacturing Engineer

Systems - Loads Analyst

Systems - Loads Analyst

Sr. Structural Analysis Engineer, Test

Sr. Structural Analysis Engineer, Test

Senior Mechanisms Engineer

Senior Mechanisms Engineer

Sr. Engineer, Aerodynamics

Sr. Engineer, Aerodynamics

Rotor/Control Systems Design Engineer

Rotor/Control Systems Design Engineer

Lead Aircraft Conceptual Design Engineer (Performance and Sizing)

Lead Aircraft Conceptual Design Engineer (Performance and Sizing)

Sr. Manufacturing Engineer

Sr. Manufacturing Engineer