<div>  </div>Position SummaryThis position is responsible for both designing and developing manufacturing systems and equipment and assessing existing systems to identify weaknesses and strengths, conducting research and analyses, developing prototypes, setting and implementing test systems and troubleshooting issues.Essential Duties and Responsibilities To perform this job successfully, an individual must be able to complete all areas outlined for this position in a satisfactory manner. <ul><li>Own the full lifecycle of manufacturing equipment by designing, developing, commissioning, maintaining, and continuously improving semi- and fully-automated manufacturing equipment to support safe, reliable, and efficient production.</li><li>Provide hands-on manufacturing floor support by spending the majority of the workday installing, troubleshooting, repairing, optimizing, and commissioning custom production equipment while partnering closely with Operators, Maintenance, Process Engineering, and Automation Controls Engineering to maximize equipment performance.</li><li>Design and implement innovative manufacturing solutions including production equipment, fixtures, jigs, tooling, and support hardware with a focus on safety, ergonomics, reliability, maintainability, manufacturability, and operational efficiency.</li><li>Drive continuous improvement and equipment reliability by leading root cause investigations, implementing permanent corrective actions, analyzing manufacturing data, and improving equipment uptime, throughput, yield, and overall equipment effectiveness.</li><li>Collaborate across cross-functional teams to bridge product engineering and manufacturing, support new product introductions, improve manufacturing processes, and ensure successful equipment integration into production.</li><li>Maintain compliance with all safety, quality, environmental, and housekeeping standards while demonstrating CelLink's culture of integrity, teamwork, accountability, innovation, and continuous improvement; perform other duties as assigned.</li></ul>Minimum QualificationsThe requirements listed below are representative of the knowledge, skills, and/or abilities to meet the minimum job requirements of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.Experience/Education <ul><li>Bachelor’s or Master’s degree in Mechanical, Electrical, or Industrial Engineering</li><li>2+ years of hands-on experience as an Equipment Engineer, Mechanical/Electrical Engineer or similar experience </li><li>Experience with design, assembly and/or maintenance of automated manufacturing equipment required</li></ul>Knowledge/Skills/Abilities<ul><li>Experience with assembly and/or maintenance of roll-to-roll manufacturing equipment preferred</li><li>Solid background in using 3D computer aided design software</li><li>Experience using PLC, and device configuration software</li><li>Knowledge of lean manufacturing principles preferred</li><li>Ability to use hand and machine tools safely</li><li>Experience developing discrete simulation models</li><li>Experience with extracting and analyzing manufacturing data</li><li>Independent problem solver with a desire to learn new skills and develop new technology</li><li>Strong organizational skills and detail-oriented mind set</li><li>Able to adapt to changing requirements in a fast-paced start-up setting</li><li>Excellent interpersonal and communication skills, strong work ethic, and ability to work in a collaborative team environment</li></ul><div>We believe diversity and inclusion among our teammates are essential to our success. We celebrate diversity and are committed to creating an inclusive environment for all employees while building teams that represent a variety of backgrounds, perspectives, and skills. We are an equal opportunity employer. All employment is decided based on qualifications, merit, and business needs. CelLink participates in the E-Verify program in specific locations as required by law.CelLink was founded in 2012 and entered volume production in 2018. CelLink provides electrical systems to the world's leading automotive OEMs &amp; EV manufacturers, data center developers, and stationary power companies. The company has raised approximately $315M in funding through private investment and multiple grants from the US Department of Energy. CelLink’s investors include 3M, Atreides, BMW, BorgWarner, Bosch, D1 Capital, Fidelity, Fontinalis Partners, Ford, Franklin Templeton, Lear, Park West, SK Telecom, Standard Investments, T. Rowe Price, Tinicum, and Whale Rock. </div>

CelLink&rsquo;s high-conductance circuits integrate busing, fusing, voltage monitoring, and temperature monitoring wiring systems into a single circuit. Our circuits provide much greater control over power and data transmission than traditional round wire &ndash; at 1/4th the weight and 1/10th the volume. Thanks to a completely tool-less manufacturing process, CelLink&rsquo;s minimum order quantity is one.

Manufacturing Equipment Engineer, Sustaining-TX

<div>  </div>Position SummaryThis position is responsible for both designing and developing manufacturing systems and equipment and assessing existing systems to identify weaknesses and strengths, conducting research and analyses, developing prototypes, setting and implementing test systems and troubleshooting issues.Essential Duties and Responsibilities To perform this job successfully, an individual must be able to complete all areas outlined for this position in a satisfactory manner. <ul><li>Own the full lifecycle of manufacturing equipment by designing, developing, commissioning, maintaining, and continuously improving semi- and fully-automated manufacturing equipment to support safe, reliable, and efficient production.</li><li>Provide hands-on manufacturing floor support by spending the majority of the workday installing, troubleshooting, repairing, optimizing, and commissioning custom production equipment while partnering closely with Operators, Maintenance, Process Engineering, and Automation Controls Engineering to maximize equipment performance.</li><li>Design and implement innovative manufacturing solutions including production equipment, fixtures, jigs, tooling, and support hardware with a focus on safety, ergonomics, reliability, maintainability, manufacturability, and operational efficiency.</li><li>Drive continuous improvement and equipment reliability by leading root cause investigations, implementing permanent corrective actions, analyzing manufacturing data, and improving equipment uptime, throughput, yield, and overall equipment effectiveness.</li><li>Collaborate across cross-functional teams to bridge product engineering and manufacturing, support new product introductions, improve manufacturing processes, and ensure successful equipment integration into production.</li><li>Maintain compliance with all safety, quality, environmental, and housekeeping standards while demonstrating CelLink's culture of integrity, teamwork, accountability, innovation, and continuous improvement; perform other duties as assigned.</li></ul>Minimum QualificationsThe requirements listed below are representative of the knowledge, skills, and/or abilities to meet the minimum job requirements of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.Experience/Education <ul><li>Bachelor’s or Master’s degree in Mechanical, Electrical, or Industrial Engineering</li><li>2+ years of hands-on experience as an Equipment Engineer, Mechanical/Electrical Engineer or similar experience </li><li>Experience with design, assembly and/or maintenance of automated manufacturing equipment required</li></ul>Knowledge/Skills/Abilities<ul><li>Experience with assembly and/or maintenance of roll-to-roll manufacturing equipment preferred</li><li>Solid background in using 3D computer aided design software</li><li>Experience using PLC, and device configuration software</li><li>Knowledge of lean manufacturing principles preferred</li><li>Ability to use hand and machine tools safely</li><li>Experience developing discrete simulation models</li><li>Experience with extracting and analyzing manufacturing data</li><li>Independent problem solver with a desire to learn new skills and develop new technology</li><li>Strong organizational skills and detail-oriented mind set</li><li>Able to adapt to changing requirements in a fast-paced start-up setting</li><li>Excellent interpersonal and communication skills, strong work ethic, and ability to work in a collaborative team environment</li></ul><div>We believe diversity and inclusion among our teammates are essential to our success. We celebrate diversity and are committed to creating an inclusive environment for all employees while building teams that represent a variety of backgrounds, perspectives, and skills. We are an equal opportunity employer. All employment is decided based on qualifications, merit, and business needs. CelLink participates in the E-Verify program in specific locations as required by law.CelLink was founded in 2012 and entered volume production in 2018. CelLink provides electrical systems to the world's leading automotive OEMs &amp; EV manufacturers, data center developers, and stationary power companies. The company has raised approximately $315M in funding through private investment and multiple grants from the US Department of Energy. CelLink’s investors include 3M, Atreides, BMW, BorgWarner, Bosch, D1 Capital, Fidelity, Fontinalis Partners, Ford, Franklin Templeton, Lear, Park West, SK Telecom, Standard Investments, T. Rowe Price, Tinicum, and Whale Rock. </div>

Manufacturing Equipment Engineer, Sustaining-TX

About the Job

About the Company

CelLink

Similar Jobs

Manufacturing Engineer

Manufacturing Engineer