The position requires application responsibility of automotive products from BorgWarner product protfolio including customer interface to gather technical requirements, selecting the right product from BorgWarner product line for each application, coordinating internal activities of matching, prototyping, validation and release, etc, and solving the engineering issues during the product application development stage.#LI-HybridKEY ACCOUNTABILITIES:<ul><li>Leader of the design team for the definition of a specific product.</li><li>Creates, develops or adapts product design concepts based on internal standards, calculations, trials, measurements, bench tests, CAE simulations and process methods in conjunction inputs from customers.</li><li>Checks and releases 2D drawings and 3D models within the associated project or existing products under serial production.</li><li>Establishes interface with customers for product and specification definitions. Participates in the validation plan definition throughout the product development process, establishing the interface with customers product validation phase.</li><li>Responsible for presenting product test results through the internal and external project customers.</li><li>Leads the D-FMEA release and establishes the product special characteristics SC/CC definition.</li><li>Coordinates the planning and production of Prototype Samples.</li><li>Creates and participates in the release of the Prototype Control Plan.</li><li>Can coordinate prototype production cost calculation.</li><li>Must execute Eng. tasks under the established Program time frame</li><li>Can coordinate the Project Development and Project team up to industrialization Kick off.</li><li>Creates or participates on product engineering standards releases.</li><li>Defines the product special characteristics for individual components.</li><li>Prepares tolerance stack-up studies.</li><li>Will require materials selection, standards use and tolerance definition for casted, molded, bended or stamped parts.</li><li>Will require knowledge in electronic hardware components to discuss or ask for alternatives by PCBA suppliers in conjunction with required functionalities.</li><li>Will require a basic understanding in programming of required software applications.</li><li>Technically assists the Production Plants within the scope of the products under serial production, for any required change due to product design correction, upgrade, or cost reduction.</li><li>Ability to demonstrate a high knowledge in failure mode analysis.</li><li>Ability to find applicable software solutions for the customer.</li><li>Must have an understanding in FEM analysis and product testing as required in the automotive area.</li><li>Demonstrates knowledge and responsibility for the performance of the quality system and standards.</li></ul>EDUCATION/EXPERIENCE<ul><li>Master’s Degree in Electrical Engineering with mechanical / electronic background,</li><li>2+ years of experience as Product Engineer in automotive industry or related field.</li><li>2+ years of experience in project management in automotive industry highly desired.</li><li>Knowledge of AIAG and/or VDA standards. IATF procedures knowledge desired.</li><li>Good knowledge of SAP R3, CATIA V5, Team Center, Microsoft Office, Microsoft Project</li><li>Effective presentation skills and ability to respond to questions from management and/or customers.</li><li>Knowledge in CAN, LIN communication and OBD requirements, measurement devices as CANoe/ CANape/ INCA, in requirement management systems as DOORS/IRQA highly desired </li><li>Understanding of manufacturing processes and their influences of electronic behavior and failure mode.</li><li>Understanding in FEM analysis and product testing as required in the automotive area.</li><li>Good English language skills (spoken and written); other languages a plus.</li><li>Proficiency level Portuguese (spoken and written).</li><li>Document management system, ANSYS, MATLAB, 5S techniques knowledge desired.</li><li>Ability to carry out multiple tasks simultaneously without supervision.</li></ul>Internal Use Only: SalaryGlobal Terms of Use and Privacy Statement Carefully read the BorgWarner Privacy Policy before using this website. Your  ability to access and use this website and apply for a job at BorgWarner are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking <a href="https://www.borgwarner.com/legal/privacy-policy-for-online-applications">here</a><a href="http://multimedia.3m.com/mws/media/1274940O/3m-jobs-country-data-privacy-statements-external.pdf">,</a> select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.Career Scam Disclaimer:  BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website.  To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner.  Applicants should never provide their national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online.  Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities.

As a global product leader for over 130 years, we deliver innovative and sustainable mobility solutions. Guided by our commitment to inclusion, integrity, excellence, responsibility and collaboration&mdash;and our pledge to reach carbon neutrality by 2035&mdash;we&rsquo;re leading the automotive industry to a future that is cleaner, healthier and safer for all.
Start your future with BorgWarner now! We are looking for dedicated, talented people to fill our manufacturing and technical facilities all over the world. For more information, please visit: https://bit.ly/WorkAtBorgWarner
For legal and data protection inquiries please visit: https://www.borgwarner.com/legal
Career Scam Disclaimer BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their Social Security numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner&rsquo;s website to verify the authenticity of any employment opportunities.

Applications Engineer

The position requires application responsibility of automotive products from BorgWarner product protfolio including customer interface to gather technical requirements, selecting the right product from BorgWarner product line for each application, coordinating internal activities of matching, prototyping, validation and release, etc, and solving the engineering issues during the product application development stage.#LI-HybridKEY ACCOUNTABILITIES:<ul><li>Leader of the design team for the definition of a specific product.</li><li>Creates, develops or adapts product design concepts based on internal standards, calculations, trials, measurements, bench tests, CAE simulations and process methods in conjunction inputs from customers.</li><li>Checks and releases 2D drawings and 3D models within the associated project or existing products under serial production.</li><li>Establishes interface with customers for product and specification definitions. Participates in the validation plan definition throughout the product development process, establishing the interface with customers product validation phase.</li><li>Responsible for presenting product test results through the internal and external project customers.</li><li>Leads the D-FMEA release and establishes the product special characteristics SC/CC definition.</li><li>Coordinates the planning and production of Prototype Samples.</li><li>Creates and participates in the release of the Prototype Control Plan.</li><li>Can coordinate prototype production cost calculation.</li><li>Must execute Eng. tasks under the established Program time frame</li><li>Can coordinate the Project Development and Project team up to industrialization Kick off.</li><li>Creates or participates on product engineering standards releases.</li><li>Defines the product special characteristics for individual components.</li><li>Prepares tolerance stack-up studies.</li><li>Will require materials selection, standards use and tolerance definition for casted, molded, bended or stamped parts.</li><li>Will require knowledge in electronic hardware components to discuss or ask for alternatives by PCBA suppliers in conjunction with required functionalities.</li><li>Will require a basic understanding in programming of required software applications.</li><li>Technically assists the Production Plants within the scope of the products under serial production, for any required change due to product design correction, upgrade, or cost reduction.</li><li>Ability to demonstrate a high knowledge in failure mode analysis.</li><li>Ability to find applicable software solutions for the customer.</li><li>Must have an understanding in FEM analysis and product testing as required in the automotive area.</li><li>Demonstrates knowledge and responsibility for the performance of the quality system and standards.</li></ul>EDUCATION/EXPERIENCE<ul><li>Master’s Degree in Electrical Engineering with mechanical / electronic background,</li><li>2+ years of experience as Product Engineer in automotive industry or related field.</li><li>2+ years of experience in project management in automotive industry highly desired.</li><li>Knowledge of AIAG and/or VDA standards. IATF procedures knowledge desired.</li><li>Good knowledge of SAP R3, CATIA V5, Team Center, Microsoft Office, Microsoft Project</li><li>Effective presentation skills and ability to respond to questions from management and/or customers.</li><li>Knowledge in CAN, LIN communication and OBD requirements, measurement devices as CANoe/ CANape/ INCA, in requirement management systems as DOORS/IRQA highly desired&nbsp;</li><li>Understanding of manufacturing processes and their influences of electronic behavior and failure mode.</li><li>Understanding in FEM analysis and product testing as required in the automotive area.</li><li>Good English language skills (spoken and written); other languages a plus.</li><li>Proficiency level Portuguese (spoken and written).</li><li>Document management system, ANSYS, MATLAB, 5S techniques knowledge desired.</li><li>Ability to carry out multiple tasks simultaneously without supervision.</li></ul>Internal Use Only: SalaryGlobal Terms of Use and Privacy Statement Carefully read the BorgWarner Privacy Policy before using this website. Your &nbsp;ability to access and use this website and apply for a job at BorgWarner are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking <a href="https://www.borgwarner.com/legal/privacy-policy-for-online-applications">here</a><a href="http://multimedia.3m.com/mws/media/1274940O/3m-jobs-country-data-privacy-statements-external.pdf">,</a> select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.Career Scam Disclaimer:&nbsp; BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website.&nbsp; To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. &nbsp;Applicants should never provide their national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. &nbsp;Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities.

Applications Engineer

About the Job

About the Company

BorgWarner

Similar Jobs

Design Engineer

Design Engineer

Product Development Engineer

Product Development Engineer

Product Engineer

Product Engineer

Project Technical Engineer

Project Technical Engineer

Applications Engineer

Applications Engineer

Application Engineer

Application Engineer

Controls Engineer

Controls Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer