GENERAL FOR SENIOR RESOURCEA] GENERAL<ul><li>Senior technical resource may serve as technical advisor for team and shall lead a team for set of projects.</li><li>Provides specialized technical input to studies and design for staff's specific area of expertise.</li><li>Develops study and design procedures to facilitate high-quality cost-effective work by  others.</li><li>Participates in interdisciplinary review of project deliverables.</li><li>Develops construction cost estimates and estimates of technical efforts for projects.</li><li>Uses expertise in all steps of completing discipline component of PL-FF package.</li><li>Performs quality control review of design calculations or drawings.</li><li>Prepares technical specification sections.</li><li>Provides input to the development of engineering budget and schedule to meet requirements.</li><li>Represents company at Senior level before clients and stakeholders.</li></ul>JOB DESCRIPTION FOR PLUMBING SYSTEM DESIGNDesign of Plumbing system shall consist of (but not limited to) the following –<ul><li>Understanding and categorizing of project into type of Building as per National Building Code of India 2016. </li><li>Conceptualization of design theme. </li><li> Performing hydraulic calculations for determining the flowrates, head and pipe sizes for various systems under Plumbing.</li><li> Preparing Water demand calculations and Water Balance diagram.</li><li> Preparation of Design Basis Report for Plumbing System along with required drawings/sketches.</li><li> Estimating of Water storage / reserve to be planned. Deciding size and arrangement of U.G and O.H storage tanks. Planning of pump room with equipment, networking of pumps, piping, panel etc.</li><li> Preparation of Water supply &amp; Drainage schematic.</li><li> Preparation of Schematic layouts for water supply, internal drainage, external drainage etc.</li><li> Estimation of Power demand for Plumbing system. </li><li> Preparation of Automation scheme for water tanks, deciding minimum I/Os required.</li></ul>TENDER &amp; PROCUMENT:<ul><li> Preparation of Tender documents includes detailed Plumbing Layouts, Technical Specification, approved make List &amp; BOQ for Tender enquiry.</li><li> Techno-Commercial Evaluation of different types of Plumbing equipment &amp; selection of optimum solution in view of project requirement.</li><li>  Preparation of block estimates based on available rates or through rate analysis.</li><li> Techno-Commercial Evaluation of technical bids.</li><li> Attending pre-bid meetings.</li></ul>GOOD FOR CONSTRUCTION STAGE:<ul><li> Preparation of Plumbing GFC layouts and sections.</li><li> Coordination of layouts with Architectural, Structural/Civil and other disciplines.</li></ul>CONSTRUCTION ADMINISTRATION:<ul><li>Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA   Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc.</li><li>Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required.​​​​​​</li></ul>DOCUMENTATION PROCESSES:         • Actively coordinating with various disciplines such as Architecture, Civil, Structural etc.       • Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-disciplinary checks from various disciplines and clearances from discipline leaders.     IT/SOFTWARE SKILLS:<ul><li>Proficiency in use of M.S office.</li><li>Knowledge of AutoCAD.</li><li>Knowledge and preferably experience on REVIT 3D.</li></ul>JOB DESCRIPTION FOR FIRE FIGHTING SYSTEM DESIGNDesign of Fire Fighting system consists of (but not limited to) the following –<ul><li>Understanding and categorizing of project into applicable Class of Fire . </li><li>Conceptualization of design theme. </li><li>Preparation of Design Basis Report for Fire Fighting System along with required drawings/sketches.</li><li>Designing of Fire Fighting system and its equipment adhering to NBC/IS/NFPA norms or guidelines consisting of (but not limited to):</li><li>Hydraulic calculation of water flowrate required for effective Fire Fighting. Selection of Pump capacity accordingly.</li><li>Estimating of Water storage / reserve. Deciding size and arrangement of U.G and O.H storage tanks. Planning of Fire pump room, networking of pumps.</li><li>Preparation of Sprinkler system schematic layouts referring provisions given in standards.</li><li>Hydraulic design of Sprinkler system using Pipenet.</li><li>Preparation of Hydrants schematic layouts referring criteria given in standards.</li><li>Hydraulic design of Wet-riser network using Pipenet.</li><li>Design of Preaction system.</li><li>Design of Gas suppression system.</li><li>Selection and planning of Fire Extinguishers on layouts.</li><li>Planning, design and preparation of Water curtains for compartmentation.</li><li>Preparation of Schematic Fire fighting layouts &amp; Fire SLD.</li><li>Gas suppression system.</li></ul>TENDER &amp; PROCUREMENT:<ul><li>Preparation of Tender documents includes detailed Fire Fighting Layouts, Technical Specification, approved make List &amp; BOQ for Tender enquiry.</li><li>Techno-Commercial Evaluation of different types of fire pumps &amp; selection of optimum solution in view of project requirement.</li><li>Preparation of block estimates.</li><li>Techno-Commercial Evaluation of technical bids.</li><li>Attending pre-bid meetings.</li></ul>GOOD FOR CONSTRUCTION STAGE:<ul><li>Preparation of Fire Fighting GFC layouts and sections.</li><li>Coordination of layouts with Architectural, Structural/Civil and other disciplines.</li></ul>CONSTRUCTION ADMINISTRATION:<ul><li>Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc.</li><li>Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required.</li></ul>DOCUMENTATION PROCESSES:      • Actively coordinating with various disciplines such as Architecture, Civil, Structural etc.       • Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-  disciplinary checks from various disciplines and clearances from discipline leaders.IT/SOFTWARE SKILLS:    • Use of Navisworks for review of Model.     • Knowledge of AutoCAD.     • Knowledge and preferably experience on REVIT 3D.     • Experience of working on Pipenet Spray/Sprinkler module.

AECOM is the world&rsquo;s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle &ndash; from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM.

Mechanical Engineering 

GENERAL FOR SENIOR RESOURCEA] GENERAL<ul><li>Senior technical resource may serve as technical advisor for team and shall lead a team for set of projects.</li><li>Provides specialized technical input to studies and design for staff's specific area of&nbsp;expertise.</li><li>Develops study and design procedures to facilitate high-quality cost-effective work by&nbsp; others.</li><li>Participates in interdisciplinary review of project deliverables.</li><li>Develops construction cost estimates and estimates of technical efforts for projects.</li><li>Uses expertise in all steps of completing discipline component of PL-FF package.</li><li>Performs quality control review of design calculations or drawings.</li><li>Prepares technical specification sections.</li><li>Provides input to the development of engineering budget and schedule to meet requirements.</li><li>Represents company at Senior level before clients and stakeholders.</li></ul>JOB DESCRIPTION FOR PLUMBING SYSTEM DESIGNDesign of Plumbing system shall consist of (but not limited to) the following –<ul><li>Understanding and categorizing of project into type of Building as per National Building Code of India 2016.&nbsp;</li><li>Conceptualization of design theme.&nbsp;</li><li>&nbsp;Performing hydraulic calculations for determining the flowrates, head and pipe sizes for various systems under Plumbing.</li><li>&nbsp;Preparing Water demand calculations and Water Balance diagram.</li><li>&nbsp;Preparation of Design Basis Report for Plumbing System along with required drawings/sketches.</li><li>&nbsp;Estimating of Water storage / reserve to be planned. Deciding size and arrangement of U.G and O.H storage tanks. Planning of pump room with equipment, networking of pumps, piping, panel etc.</li><li>&nbsp;Preparation of Water supply &amp; Drainage schematic.</li><li>&nbsp;Preparation of Schematic layouts for water supply, internal drainage, external drainage etc.</li><li>&nbsp;Estimation of Power demand for Plumbing system.&nbsp;</li><li>&nbsp;Preparation of Automation scheme for water tanks, deciding minimum I/Os required.</li></ul>TENDER &amp; PROCUMENT:<ul><li>&nbsp;Preparation of Tender documents includes detailed Plumbing Layouts, Technical Specification, approved make List &amp; BOQ for Tender enquiry.</li><li>&nbsp;Techno-Commercial Evaluation of different types of Plumbing equipment &amp; selection of optimum solution in view of project requirement.</li><li>&nbsp; Preparation of block estimates based on available rates or through rate analysis.</li><li>&nbsp;Techno-Commercial Evaluation of technical bids.</li><li>&nbsp;Attending pre-bid meetings.</li></ul>GOOD FOR CONSTRUCTION STAGE:<ul><li>&nbsp;Preparation of Plumbing GFC layouts and sections.</li><li>&nbsp;Coordination of layouts with Architectural, Structural/Civil and other disciplines.</li></ul>CONSTRUCTION ADMINISTRATION:<ul><li>Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA&nbsp; &nbsp;Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc.</li><li>Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required.​​​​​​</li></ul>DOCUMENTATION PROCESSES:&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; • Actively coordinating with various disciplines such as Architecture, Civil, Structural etc. &nbsp; &nbsp; &nbsp; • Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-disciplinary checks from various disciplines and clearances from discipline leaders.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;IT/SOFTWARE SKILLS:<ul><li>Proficiency in use of M.S office.</li><li>Knowledge of AutoCAD.</li><li>Knowledge and preferably experience on REVIT 3D.</li></ul>JOB DESCRIPTION FOR FIRE FIGHTING SYSTEM DESIGNDesign of Fire Fighting system consists of (but not limited to) the following –<ul><li>Understanding and categorizing of project into applicable Class of Fire .&nbsp;</li><li>Conceptualization of design theme.&nbsp;</li><li>Preparation of Design Basis Report for Fire Fighting System along with required drawings/sketches.</li><li>Designing of Fire Fighting system and its equipment adhering to NBC/IS/NFPA norms or guidelines consisting of (but not limited to):</li><li>Hydraulic calculation of water flowrate required for effective Fire Fighting. Selection of Pump capacity accordingly.</li><li>Estimating of Water storage / reserve. Deciding size and arrangement of U.G and O.H storage tanks. Planning of Fire pump room, networking of pumps.</li><li>Preparation of Sprinkler system schematic layouts referring provisions given in standards.</li><li>Hydraulic design of Sprinkler system using Pipenet.</li><li>Preparation of Hydrants schematic layouts referring criteria given in standards.</li><li>Hydraulic design of Wet-riser network using Pipenet.</li><li>Design of Preaction system.</li><li>Design of Gas suppression system.</li><li>Selection and planning of Fire Extinguishers on layouts.</li><li>Planning, design and preparation of Water curtains for compartmentation.</li><li>Preparation of Schematic Fire fighting layouts &amp; Fire SLD.</li><li>Gas suppression system.</li></ul>TENDER &amp; PROCUREMENT:<ul><li>Preparation of Tender documents includes detailed Fire Fighting Layouts, Technical Specification, approved make List &amp; BOQ for Tender enquiry.</li><li>Techno-Commercial Evaluation of different types of fire pumps &amp; selection of optimum solution in view of project requirement.</li><li>Preparation of block estimates.</li><li>Techno-Commercial Evaluation of technical bids.</li><li>Attending pre-bid meetings.</li></ul>GOOD FOR CONSTRUCTION STAGE:<ul><li>Preparation of Fire Fighting GFC layouts and sections.</li><li>Coordination of layouts with Architectural, Structural/Civil and other disciplines.</li></ul>CONSTRUCTION ADMINISTRATION:<ul><li>Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc.</li><li>Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required.</li></ul>DOCUMENTATION PROCESSES:&nbsp; &nbsp; &nbsp; • Actively coordinating with various disciplines such as Architecture, Civil, Structural etc. &nbsp; &nbsp; &nbsp; • Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-&nbsp; disciplinary checks from various disciplines and clearances from discipline leaders.IT/SOFTWARE SKILLS:&nbsp; &nbsp; • Use of Navisworks for review of Model. &nbsp; &nbsp; • Knowledge of AutoCAD. &nbsp; &nbsp; • Knowledge and preferably experience on REVIT 3D. &nbsp; &nbsp; • Experience of working on Pipenet Spray/Sprinkler module.

Mechanical Engineering

About the Job

About the Company

AECOM

Similar Jobs

Mechanical Engineer

Mechanical Engineer

Mechanical Engineer

Mechanical Engineer

Project Engineer, Mechanical

Project Engineer, Mechanical

Mechanical Engineering

Mechanical Engineering

Mechanical Engineer

Mechanical Engineer

Senior Mechanical Engineer

Senior Mechanical Engineer

Mechanical Engineer

Mechanical Engineer

Product Engineer Mechanical

Product Engineer Mechanical

Mechanical Design Engineer

Mechanical Design Engineer

Mechanical Engineer

Mechanical Engineer