At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities. Reimagine What’s Possible  POSITION SUMMARY  Purpose   This position is responsible for operating and managing analytical instruments at Air Products' Annan ATD center. This position will serve as an Analytical subject matter expert, center of excellence contact point and technical advisor for ATD center operating site in Taiwan.  Nature and Scope  This position is responsible for analytical method development, compliance and documentation updates for AP products. He is required to develop/or review new/old analytical methods and ensure adequate inventory of laboratory standard gases and instrument accessories. He also handles all tasks related to quality issues, statistical process control, and any continuous improvement opportunities in the laboratory. He will also be required to provide technical training and enforce quality control standards.   PRINCIPAL ACCOUNTABILITIES  Must ensure / assist in formation of safe work practices, and fully comply with all the safety regulations and procedures at the respective work place for all TW locations.  To review / develop new analytical methods for specialty gases by using appropriate instruments in the laboratory.  To supervise, train and motivate laboratory personnel on proper maintenance / repairs / procedures / operations.  To be responsible for all analytical instruments and equipment maintenance including diagnostic and calibration, as well as liaison with vendor / supplier.  Periodically review and recognize area improvement in laboratory.  Accountability for the correct certification and issuance of certificate of conformance.  To Supervise and direct personnel on record keeping of daily analysis results and up to date record are been kept.  To be responsible for maintaining, updating and implementing APS ISO system periodically, and to assist member any of AP staff on working procedures changes or review and submission of new procedure when require in EMOC system.  To manage the process for replenishment of any necessary laboratory standard gases.  To give advice, implement and perform any modifications deems necessary for improvement in the operations and safety aspects of equipment as per specifications.  Manage the Quality improvement initiatives and customer complaint resolution.  To ensure good housekeeping at all time for the whole laboratory facilities.  To execute and delegate assignment to laboratory personnel and to guide or provide assistance to laboratory personnel in order to achieve targeted goal.  To plan and maintain high standard laboratory workforce at all time, as well as interest in laboratory personnel welfare and difficulties.  JOB REQUIREMENTS  ≥ 3 years experience in ICP-Ms operation and method develop  GCMS, FTIR, particle counter, DMA-CPC and GC(DID/FID/TCD/ECD, etc) experiences are preferred   Previous experience in a laboratory or clean room environment is preferred  Experience with gas impurity analysis, chemical analysis instrument supplier and third-party notarization are a plus  A minimum of a Bachelors degree in Chemistry  Must be hands-on and possess strong troubleshooting skills  Able to work independently as well as in a team  Possess good oral and written communication skills  Proficient with English speaking and writing Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

Air Products (NYSE:APD) is a world-leading industrial gases company in operation for over 80 years focused on serving energy, environmental, and emerging markets. The Company has two growth pillars driven by sustainability. Air Products&rsquo; base business provides essential industrial gases, related equipment and applications expertise to customers in dozens of industries, including refining, chemicals, metals, electronics, manufacturing, and food. The Company also develops, engineers, builds, owns and operates some of the world's largest clean hydrogen projects supporting the transition to low- and zero-carbon energy in the heavy-duty transportation and industrial sectors. Additionally, Air Products is the world leader in the supply of liquefied natural gas process technology and equipment, and provides turbomachinery, membrane systems and cryogenic containers globally.
The Company had fiscal 2023 sales of $12.6 billion from operations in approximately 50 countries and has a current market capitalization of about $65 billion. Approximately 23,000 passionate, talented and committed employees from diverse backgrounds are driven by Air Products&rsquo; higher purpose to create innovative solutions that benefit the environment, enhance sustainability and reimagine what's possible to address the challenges facing customers, communities, and the world.&nbsp;

ATD Lab Specialists

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities. Reimagine What’s Possible  POSITION SUMMARY  Purpose   This position is responsible for operating and managing analytical instruments at Air Products' Annan ATD center. This position will serve as an Analytical subject matter expert, center of excellence contact point and technical advisor for ATD center operating site in Taiwan.  Nature and Scope  This position is responsible for analytical method development, compliance and documentation updates for AP products. He is required to develop/or review new/old analytical methods and ensure adequate inventory of laboratory standard gases and instrument accessories. He also handles all tasks related to quality issues, statistical process control, and any continuous improvement opportunities in the laboratory. He will also be required to provide technical training and enforce quality control standards.   PRINCIPAL ACCOUNTABILITIES  Must ensure / assist in formation of safe work practices, and fully comply with all the safety regulations and procedures at the respective work place for all TW locations.  To review / develop new analytical methods for specialty gases by using appropriate instruments in the laboratory.  To supervise, train and motivate laboratory personnel on proper maintenance / repairs / procedures / operations.  To be responsible for all analytical instruments and equipment maintenance including diagnostic and calibration, as well as liaison with vendor / supplier.  Periodically review and recognize area improvement in laboratory.  Accountability for the correct certification and issuance of certificate of conformance.  To Supervise and direct personnel on record keeping of daily analysis results and up to date record are been kept.  To be responsible for maintaining, updating and implementing APS ISO system periodically, and to assist member any of AP staff on working procedures changes or review and submission of new procedure when require in EMOC system.  To manage the process for replenishment of any necessary laboratory standard gases.  To give advice, implement and perform any modifications deems necessary for improvement in the operations and safety aspects of equipment as per specifications.  Manage the Quality improvement initiatives and customer complaint resolution.  To ensure good housekeeping at all time for the whole laboratory facilities.  To execute and delegate assignment to laboratory personnel and to guide or provide assistance to laboratory personnel in order to achieve targeted goal.  To plan and maintain high standard laboratory workforce at all time, as well as interest in laboratory personnel welfare and difficulties.  JOB REQUIREMENTS  ≥ 3 years experience in ICP-Ms operation and method develop  GCMS, FTIR, particle counter, DMA-CPC and GC(DID/FID/TCD/ECD, etc) experiences are preferred   Previous experience in a laboratory or clean room environment is preferred  Experience with gas impurity analysis, chemical analysis instrument supplier and third-party notarization are a plus  A minimum of a Bachelors degree in Chemistry  Must be hands-on and possess strong troubleshooting skills  Able to work independently as well as in a team  Possess good oral and written communication skills  Proficient with English speaking and writing Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

ATD Lab Specialists

About the Job

About the Company

Air Products

Similar Jobs

Laboratory Technician

Laboratory Technician

R&D Technician

R&D Technician

Manufacturing Quality Laboratory Services

Manufacturing Quality Laboratory Services

Lab Manager

Lab Manager

Laboratory Technician

Laboratory Technician

Chemist, Laboratory Operations & R&D

Chemist, Laboratory Operations & R&D

Laboratory Technician 2

Laboratory Technician 2

Quality Technician II

Quality Technician II

Operation and Maintenance Technician

Operation and Maintenance Technician

R&D Test Lab Engineer

R&D Test Lab Engineer