<h2>Company Overview</h2><p>Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service.</p><h2>Overview</h2><p>Joby Aviation is seeking a materials engineer to join our Additive Manufacturing team. You will own the full material lifecycle for AM metallic components—feedstock qualification through post-processing and failure analysis as a principal contributor to Joby's materials qualification program supporting eVTOL development, certification, and production. </p><p>You are a self-starter with a strong command of microstructure-processing-properties relationships in aerospace alloys and thrive at the intersection of hands-on lab work and cross-functional collaboration. </p><h2>Responsibilities</h2><p>Powder &amp; Feedstock Materials </p><ul> <li>Own incoming qualification and lot acceptance of metallic feedstocks (PSD, morphology, chemistry, flowability, density) </li> <li>Develop and maintain feedstock control procedures aligned with AM process requirements</li> <li>Characterize powder degradation and establish reuse limits, blending protocols, and out-of-life criteria </li> <li>Manage powder suppliers: acceptance specs, source approvals, and non-conformances </li></ul><p>Surface Finishing &amp; Post-Processing </p><ul> <li>Define and qualify AM surface finishing: tumbling, vibratory finishing, electropolishing, chemical etching, shot peening, and precision machining </li> <li>Characterize surface roughness (Ra/Rz/Sa), residual stress, and sub-surface microstructure before and after finishing </li> <li>Qualify coatings and surface treatments (anodize, hard coat, conversion coating, thermal spray, PVD/CVD) for corrosion, wear, and fatigue requirements </li> <li>Establish acceptance criteria and inspection methods for finished AM surfaces </li> <li>Identify and qualify heat treatment processes for AM parts (stress relief, HIP, solution treat and age) </li></ul><p>Specifications, Suppliers &amp; Compliance </p><ul> <li>Investigate coupon- and component-level failures; perform fracture analysis and drive corrective actions </li> <li>Author material and process specifications covering feedstock, build parameters, post-processing, and acceptance criteria </li> <li>Support materials allowables and design-allowable data packages for FAA certification </li> <li>Partner with stress, design, and quality on material inputs, qualification packages, and MRB dispositions </li></ul><ul> <li> </li></ul><h2>Required</h2><ul> <li>B.S. in Materials, Metallurgical, Mechanical, Aerospace Engineering, or a related field of study</li> <li>2+ years in metallic materials characterization, processing, or manufacturing engineering </li> <li>Working knowledge of metallic powder characteristics, handling, and qualification </li> <li>Familiarity with one or more metal AM processes  </li> <li>Experience with common materials characterization techniques (e.g., microscopy, hardness, mechanical testing) </li> <li>Strong written and verbal communication; able to author specs and present to cross-functional stakeholders </li> <li>Able to work independently in a fast-paced environment and meet program deadlines (onsite in Marina, CA)</li></ul><h2>Desired</h2><ul> <li>M.S. or Ph.D. in Materials Science, Metallurgical Engineering, or a related field of study</li> <li>5+ years in a controlled/certified manufacturing environment (AS9100, NADCAP, or equivalent) </li> <li>Hands-on with the full powder lifecycle: atomization, sieving, morphology, reuse qualification, and disposal </li> <li>Practical knowledge of AM surface finishing and its effect on fatigue life and dimensional compliance </li> <li>Experience with AM-specific defects: porosity, lack of fusion, keyhole voids, residual stress, and anisotropy </li> <li>Familiarity with X-ray CT for AM defect and dimensional inspection </li> <li>Prior experience authoring M&amp;P specifications in regulated aerospace environments</li> <li>Exposure to fatigue/fracture testing, allowables generation, or FAA certification data packages </li></ul><h2>Additional Information</h2><p>Compensation at Joby is a combination of base pay and Restricted Stock Units (RSUs). The target base pay for this position is $86,800 - $137,700/yr. The compensation package will be determined by job-related knowledge, skills, and experience.</p><p> </p><p>Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.</p><p> </p><p><strong>Joby is an Equal Opportunity Employer.</strong></p>

Joby Aviation develops a new generation of electric personal aircraft created to revolutionize personal mobility. Its strength is in composite airframe design and fabrication, aerodynamic analysis, high-performance electric motor development, and cutting-edge battery pack design, enabling clients to create a paradigm shift in transportation with safe, quiet, fast and affordable electric vertical takeoff.

Materials Engineer

About the Job

About the Company

Joby Aviation

Similar Jobs

Metallurgical Engineer (Ph.D.)

Metallurgical Engineer (Ph.D.)

Materials Engineer (Creep & High Temp Metallics Design)

Materials Engineer (Creep & High Temp Metallics Design)

Manufacturing Engineer (Composites)

Manufacturing Engineer (Composites)

Materials Engineer

Materials Engineer

Materials Scientist/Engineer (Ph.D.)

Materials Scientist/Engineer (Ph.D.)

Materials & Processes Engineer

Materials & Processes Engineer

Composite Process Specialist / Engineer

Composite Process Specialist / Engineer

Mechanical Engineer

Mechanical Engineer

Composite Materials & Process Engineering Technician

Composite Materials & Process Engineering Technician

Process Development Engineer

Process Development Engineer