ICON is seeking a Electrical Manufacturing Engineer to drive the development and implementation of world-class manufacturing processes for our cutting-edge construction technologies. This role is critical to ensuring our products are built safely, efficiently, and at scale, meeting the highest standards of quality, certification, and reliability. The ideal candidate will bring hands-on electrical manufacturing experience, deep process and data fluency, and cross-functional collaboration skills. You’ll work across mechanical and electrical systems, leading initiatives in quality control, process optimization, and configuration management that will shape ICON’s next generation of products. This role is based at ICON’s Austin, TX campus and will report to our Manufacturing Engineering Manager.  RESPONSIBILITIES:​Manufacturing Process &amp; Quality<ul><li>Design, implement, and optimize manufacturing processes that support scalability, efficiency, and repeatability across Titan printer and MCU production phases</li><li>Develop and manage critical quality systems—including NRTL and CE certifications—ensuring compliance with regulatory and safety standards at all manufacturing stages</li><li>Implement poka-yoke controls and data-driven approaches to process control, troubleshooting, and continuous improvement</li><li>Provide floor-level support for assembly, test, and validation activities—including hands-on root cause analysis and corrective action implementation</li></ul>Electrical Assembly &amp; Integration<ul><li>Lead electrical assembly and wiring of Titan printer and MCU builds across DVT and production phases</li><li>Interpret and maintain electrical schematics, wiring diagrams, panel layouts, and connector maps</li><li>Install, route, and terminate cable harnesses, power distribution panels, and control system wiring</li><li>Coordinate with mechanical assembly teams on wire management, chassis cutouts, and interface hardware</li></ul>Test &amp; Validation<ul><li>Execute Factory Acceptance Test (FAT) procedures covering electrical continuity, power-on, motor drive verification, sensor calibration, and E-stop function</li><li>Support functional checkout of 480V three-phase power distribution, 24VDC control circuits, and CAN/Ethernet network communications</li><li>Operate bench test equipment (oscilloscopes, multimeters, power analyzers, insulation testers) and interpret results</li><li>Document test results, non-conformances, and first-pass yield data in Jira and production traveler systems</li><li>Participate in failure analysis on field returns—trace root cause to component, wiring, or procedural sources</li></ul>Process Documentation &amp; Tooling<ul><li>Develop and refine manufacturing electrical test fixtures, breakout boards, and harness verification jigs</li><li>Write and maintain work instructions for recurring electrical assembly tasks, written for technician execution; flag and redline discrepancies between drawings and physical builds</li><li>Manage and maintain complex Bills of Materials (BOMs), process routings, and manufacturing documentation</li><li>Collaborate with supply chain on component BOM accuracy, approved vendor lists, and incoming inspection criteria</li></ul>New Product Introduction &amp; Engineering Collaboration<ul><li>Lead cross-functional NPI efforts with engineering, quality, and production teams to ensure seamless transition from prototype to full-scale production</li><li>Partner with product and process engineers to evaluate manufacturability during early design phases and standardize assembly processes across product lines</li><li>Participate in design reviews (PDR, CDR, build reviews) with a manufacturing lens—flag producibility and testability gaps</li><li>Oversee ECRs and ECOs; submit and track wiring changes while maintaining Duro BOM accuracy for electrical assemblies</li></ul>Facilities, Tooling &amp; Capacity<ul><li>Contribute to facility layout planning, tooling design, capacity modeling, and equipment selection to support long-term manufacturing scalability</li><li>Support capital planning for electrical test equipment, panel fabrication, and production tooling</li></ul>Team Development<ul><li>Mentor and support electrical technicians during production ramp</li></ul> MINIMUM QUALIFICATIONS:<ul><li>Bachelor’s degree in Electrical Manufacturing Engineering, Electrical Engineering, Mechanical, Industrial, or Manufacturing Engineering, or a related technical field.</li><li>5+ years of experience in manufacturing engineering or process engineering in a product-based or construction-focused environment.</li><li>Proficiency reading and interpreting electrical schematics, wiring diagrams, and panel layouts</li><li>Familiarity with VFDs, servo drives, and associated wiring practices</li><li>Understanding of wire harness fabrication, cable management, and connector termination standards</li><li>Proven experience across mechanical and electrical system manufacturing, including mobile or large-scale machinery.</li><li>Hands-on experience with welding, fabrication, and electro-mechanical assemblies.</li><li>Deep understanding of process documentation, quality standards, and configuration management practices.</li><li>Proficiency in SolidWorks or other parametric CAD tools.</li><li>Strong interpersonal and communication skills to facilitate collaboration across teams.</li><li>Ability to lift 50 lbs unassisted and support hands-on troubleshooting in a factory environment.</li></ul>PREFERRED SKILLS AND EXPERIENCE: <ul><li>Advanced data analytics skills with the ability to use metrics and statistical tools for process optimization and problem-solving.</li><li>Experience managing third-party certifications (NRTL, CE) and navigating product compliance pathways.</li><li>Demonstrated ownership of process definition and implementation in a fast-paced, iterative R&amp;D-to-production environment.</li><li>Strong systems thinking with the ability to synthesize mechanical, electrical, and software elements into streamlined manufacturing processes.</li><li>Comfortable navigating ambiguity and shifting priorities with a flexible, solution-oriented mindset. </li></ul><div><div> </div><div><div>ICON is an equal opportunity employer committed to fostering an innovative, inclusive, diverse and discrimination-free work environment. Employment with ICON is based on merit, competence, and qualifications. It is our policy to administer all personnel actions, including recruiting, hiring, training, and promoting employees, without regard to race, color, religion, gender, sexual orientation, gender identity, national origin or ancestry, age, disability, marital status, veteran status, or any other legally protected classification in accordance with applicable federal and state laws. Consistent with the obligations of these laws, ICON will make reasonable accommodations for qualified individuals with disabilities.</div><div>Furthermore, as a federal government contractor, the Company maintains an affirmative action program which furthers its commitment and complies with recordkeeping and reporting requirements under certain federal civil rights laws and regulations, including Executive Order 11246, Section 503 of the Rehabilitation Act of 1973 (as amended) and the Vietnam Era Veterans' Readjustment Assistance Act of 1974 (as amended).Headhunters and recruitment agencies may not submit candidates through this application. ICON does not accept unsolicited headhunter and agency submissions for candidates and will not pay fees to any third-party agency without a prior agreement with ICON.</div></div><div>As part of our compliance with these obligations, the Company invites you to voluntarily self-identify as set forth below. Provision of such information is entirely voluntary and a decision to provide or not provide such information will not have any effect on your employment or subject you to any adverse treatment. Any and all information provided will be considered confidential, will be kept separate from your application and/or personnel file, and will only be used in accordance with applicable laws, orders and regulations, including those that require the information to be summarized and reported to the federal government for civil rights enforcement purposes.<a href="https://drive.google.com/drive/folders/1KtxCrS8fV9XRApKaXFjKJ5twhzR_MkGE">Internet Applicant Employment Notices</a></div></div>

In 2018, we told people we were going to 3D print a house and unveil it during SXSW in Austin, TX before we knew how to do it.&nbsp;Innovation is synonymous with risk and somebody had to take a risk. In partnership with housing non-profit New Story, we successfully delivered the world's first permitted, 3D-printed home in the world. Fast forward to today,&nbsp;ICON has 3D-printed more than 140 homes and&nbsp;structures across the U.S. and Mexico. We recently unveiled a new suite of technologies and products&nbsp;to further automate construction including&nbsp;a radical new robotic printer that enables multi-story construction, a new low-carbon building material, a digital catalog for residential architecture, and an AI Architect for home design and construction. Together, these technologies make our construction technology platform a faster, more sustainable way to build high-quality housing affordably around the world.

Electrical Manufacturing Engineer II

ICON is seeking a Electrical Manufacturing Engineer to drive the development and implementation of world-class manufacturing processes for our cutting-edge construction technologies. This role is critical to ensuring our products are built safely, efficiently, and at scale, meeting the highest standards of quality, certification, and reliability. The ideal candidate will bring hands-on electrical manufacturing experience, deep process and data fluency, and cross-functional collaboration skills. You’ll work across mechanical and electrical systems, leading initiatives in quality control, process optimization, and configuration management that will shape ICON’s next generation of products. This role is based at ICON’s Austin, TX campus and will report to our Manufacturing Engineering Manager.  RESPONSIBILITIES:​Manufacturing Process &amp; Quality<ul><li>Design, implement, and optimize manufacturing processes that support scalability, efficiency, and repeatability across Titan printer and MCU production phases</li><li>Develop and manage critical quality systems—including NRTL and CE certifications—ensuring compliance with regulatory and safety standards at all manufacturing stages</li><li>Implement poka-yoke controls and data-driven approaches to process control, troubleshooting, and continuous improvement</li><li>Provide floor-level support for assembly, test, and validation activities—including hands-on root cause analysis and corrective action implementation</li></ul>Electrical Assembly &amp; Integration<ul><li>Lead electrical assembly and wiring of Titan printer and MCU builds across DVT and production phases</li><li>Interpret and maintain electrical schematics, wiring diagrams, panel layouts, and connector maps</li><li>Install, route, and terminate cable harnesses, power distribution panels, and control system wiring</li><li>Coordinate with mechanical assembly teams on wire management, chassis cutouts, and interface hardware</li></ul>Test &amp; Validation<ul><li>Execute Factory Acceptance Test (FAT) procedures covering electrical continuity, power-on, motor drive verification, sensor calibration, and E-stop function</li><li>Support functional checkout of 480V three-phase power distribution, 24VDC control circuits, and CAN/Ethernet network communications</li><li>Operate bench test equipment (oscilloscopes, multimeters, power analyzers, insulation testers) and interpret results</li><li>Document test results, non-conformances, and first-pass yield data in Jira and production traveler systems</li><li>Participate in failure analysis on field returns—trace root cause to component, wiring, or procedural sources</li></ul>Process Documentation &amp; Tooling<ul><li>Develop and refine manufacturing electrical test fixtures, breakout boards, and harness verification jigs</li><li>Write and maintain work instructions for recurring electrical assembly tasks, written for technician execution; flag and redline discrepancies between drawings and physical builds</li><li>Manage and maintain complex Bills of Materials (BOMs), process routings, and manufacturing documentation</li><li>Collaborate with supply chain on component BOM accuracy, approved vendor lists, and incoming inspection criteria</li></ul>New Product Introduction &amp; Engineering Collaboration<ul><li>Lead cross-functional NPI efforts with engineering, quality, and production teams to ensure seamless transition from prototype to full-scale production</li><li>Partner with product and process engineers to evaluate manufacturability during early design phases and standardize assembly processes across product lines</li><li>Participate in design reviews (PDR, CDR, build reviews) with a manufacturing lens—flag producibility and testability gaps</li><li>Oversee ECRs and ECOs; submit and track wiring changes while maintaining Duro BOM accuracy for electrical assemblies</li></ul>Facilities, Tooling &amp; Capacity<ul><li>Contribute to facility layout planning, tooling design, capacity modeling, and equipment selection to support long-term manufacturing scalability</li><li>Support capital planning for electrical test equipment, panel fabrication, and production tooling</li></ul>Team Development<ul><li>Mentor and support electrical technicians during production ramp</li></ul> MINIMUM QUALIFICATIONS:<ul><li>Bachelor’s degree in Electrical Manufacturing Engineering, Electrical Engineering, Mechanical, Industrial, or Manufacturing Engineering, or a related technical field.</li><li>5+ years of experience in manufacturing engineering or process engineering in a product-based or construction-focused environment.</li><li>Proficiency reading and interpreting electrical schematics, wiring diagrams, and panel layouts</li><li>Familiarity with VFDs, servo drives, and associated wiring practices</li><li>Understanding of wire harness fabrication, cable management, and connector termination standards</li><li>Proven experience across mechanical and electrical system manufacturing, including mobile or large-scale machinery.</li><li>Hands-on experience with welding, fabrication, and electro-mechanical assemblies.</li><li>Deep understanding of process documentation, quality standards, and configuration management practices.</li><li>Proficiency in SolidWorks or other parametric CAD tools.</li><li>Strong interpersonal and communication skills to facilitate collaboration across teams.</li><li>Ability to lift 50 lbs unassisted and support hands-on troubleshooting in a factory environment.</li></ul>PREFERRED SKILLS AND EXPERIENCE: <ul><li>Advanced data analytics skills with the ability to use metrics and statistical tools for process optimization and problem-solving.</li><li>Experience managing third-party certifications (NRTL, CE) and navigating product compliance pathways.</li><li>Demonstrated ownership of process definition and implementation in a fast-paced, iterative R&amp;D-to-production environment.</li><li>Strong systems thinking with the ability to synthesize mechanical, electrical, and software elements into streamlined manufacturing processes.</li><li>Comfortable navigating ambiguity and shifting priorities with a flexible, solution-oriented mindset. </li></ul><div><div> </div><div><div>ICON is an equal opportunity employer committed to fostering an innovative, inclusive, diverse and discrimination-free work environment. Employment with ICON is based on merit, competence, and qualifications. It is our policy to administer all personnel actions, including recruiting, hiring, training, and promoting employees, without regard to race, color, religion, gender, sexual orientation, gender identity, national origin or ancestry, age, disability, marital status, veteran status, or any other legally protected classification in accordance with applicable federal and state laws. Consistent with the obligations of these laws, ICON will make reasonable accommodations for qualified individuals with disabilities.</div><div>Furthermore, as a federal government contractor, the Company maintains an affirmative action program which furthers its commitment and complies with recordkeeping and reporting requirements under certain federal civil rights laws and regulations, including Executive Order 11246, Section 503 of the Rehabilitation Act of 1973 (as amended) and the Vietnam Era Veterans' Readjustment Assistance Act of 1974 (as amended).Headhunters and recruitment agencies may not submit candidates through this application. ICON does not accept unsolicited headhunter and agency submissions for candidates and will not pay fees to any third-party agency without a prior agreement with ICON.</div></div><div>As part of our compliance with these obligations, the Company invites you to voluntarily self-identify as set forth below. Provision of such information is entirely voluntary and a decision to provide or not provide such information will not have any effect on your employment or subject you to any adverse treatment. Any and all information provided will be considered confidential, will be kept separate from your application and/or personnel file, and will only be used in accordance with applicable laws, orders and regulations, including those that require the information to be summarized and reported to the federal government for civil rights enforcement purposes.<a href="https://drive.google.com/drive/folders/1KtxCrS8fV9XRApKaXFjKJ5twhzR_MkGE">Internet Applicant Employment Notices</a></div></div>

Electrical Manufacturing Engineer II

About the Job

About the Company

ICON

Similar Jobs

Controls and Electrical Engineer

Controls and Electrical Engineer

Facilities Electrical Engineer - Substations and High Voltage Infrastructure Specialist

Facilities Electrical Engineer - Substations and High Voltage Infrastructure Specialist

Electrical Drafting Technician

Electrical Drafting Technician

Electrical Engineer II

Electrical Engineer II

Process Technician - Electrical

Process Technician - Electrical

Electrical Test & Automation Engineer

Electrical Test & Automation Engineer

Electrical Systems Engineer - Power and Controls

Electrical Systems Engineer - Power and Controls

Production Engineer - Electrical / Mechanical

Production Engineer - Electrical / Mechanical

Electronics Engineering Technician

Electronics Engineering Technician

Instrumentation and Electrical Technician

Instrumentation and Electrical Technician