Role: Automation Technician Location: Sacramento, CA  Department: Manufacturing Operations  Position: Full Time  About Peak Energy Peak Energy Technologies is the first American venture to advance globally proven Sodium-Ion  battery systems as the storage standard for the new era of renewable energy on a resilient grid.  We're a team of about 105 today, growing rapidly as we move from pilot through commercial  scale-up. Our leadership team brings decades of experience from Tesla, Northvolt, Apple,  Powin, and Enovix, and we are backed by Xora, Eclipse Ventures, and TDK Ventures.  About the Role We are looking for an Automation Technician to join our Manufacturing team at our Sacramento  facility, supporting Battery Energy Storage System (BESS) manufacturing automation. This role  starts by helping build out automation equipment — mounting valves and sensors, running  cable, and wiring field devices back to power distribution panels — before shifting into a  sustaining role keeping that equipment running in full production: the first call when automated  equipment goes down, and a technical mentor to a second technician.  The right person is a seasoned, hands-on technician who is equally comfortable building a new  automation cell and troubleshooting one under production pressure, knows when a problem is  theirs to fix versus Controls/Automation Engineering's, and documents either outcome clearly.  Peak Energy is planning a two-shift manufacturing operation; this role covers a single shift and  coordinates with the opposing-shift technician to keep automation running on both shifts.  What You'll Do • Build and install automation equipment: mount and align valves, actuators, and sensors; run  cable and conduit; and terminate field wiring back to power distribution panels per  mechanical and electrical drawings — comfortable around both 24VDC control power and  480VAC three-phase machine supply distribution• Commission new equipment: perform point-to-point IO checks and loop checks, diagnose and  resolve network connectivity issues, assign and configure device IP addresses, and flash  and update PLC and device firmware• Respond to down equipment: serve as first responder to automation failures on your shift,  diagnose root cause using PLC, HMI, and network diagnostics, and restore equipment to  production as quickly and safely as possible• Escalate and document: document equipment assessments, repairs, and downtime root  cause, and escalate issues beyond technician scope to Controls/Automation Engineering  with clear, actionable handoff notes• Guide a second technician: provide day-to-day work direction, technical mentorship, and onthe-job training to a second Automation Technician on shift, ensuring consistent  troubleshooting practices across shifts• Support preventive maintenance: perform and help develop PM routines for PLC I/O modules,  sensors, servo/VFD drives, and pneumatic/hydraulic components to reduce unplanned  downtime• Follow safety procedures: apply lockout/tagout (LOTO), arc flash, and NFPA 70E electrical  safety practices, and maintain safety interlocks and emergency stop circuits on automated  equipment• Track spares and work orders: maintain critical spare parts inventory and log work orders,  downtime, and repairs in the CMMS; support commissioning and FAT/SAT activities  alongside Engineering  What You'll Bring • 5+ years of hands-on experience as an Automation, Controls, or Electrical Technician in an  industrial or manufacturing environment, spanning both equipment build/installation and  sustaining production support• Working knowledge of PLC-based control systems (e.g., Beckhoff TwinCAT, Allen-Bradley, or  Siemens), including IO troubleshooting, network diagnostics, and basic program  monitoring/forcing• Comfortable working safely around 24VDC control power and 480VAC three-phase industrial  power distribution; able to read electrical schematics, wiring diagrams, and panel prints• Proven ability to diagnose and repair mechanical, pneumatic, electrical, and controls issues  on automated equipment under production time pressure• Strong documentation habits and demonstrated ability to guide, train, and direct the work of a  less experienced technician• High school diploma or equivalent required; technical/trade school training or an Associate's  degree in Electronics or Industrial Automation is a plus  Preferred Qualifications• Journeyman or master electrician license• Experience with Beckhoff TwinCAT, Ignition by Inductive Automation, or similar  SCADA/HMI/historian platforms• OSHA 10/30 certification and NFPA 70E arc-flash safety training• Experience supporting battery, energy storage, or other 24/7 industrial manufacturing  environments  Diversity and Inclusion Peak Energy is committed to building a diverse and inclusive workforce. We strongly encourage  women, people of color, and individuals from underrepresented groups to apply. We value skills,  potential, and perspective over specific credentials.  Compensation The salary range for this role is $95,000 - $140,000, with actual pay varying based  on work location, experience, and skills. At Peak Energy, we value our employees and promote  work-life balance. Our competitive benefits package includes unlimited PTO, comprehensive  medical, dental, and vision coverage, a strong 401(k) plan, and equity opportunities.  Equal Employment Opportunity At Peak Energy Technologies Inc., we believe that a diverse and inclusive workplace makes us  a more capable, innovative, and competitive company. Peak Energy Technologies Inc. is an  equal opportunity employer and does not discriminate on the basis of race, color, ancestry,  religion, national origin, sexual orientation, citizenship, marital or family status, disability, gender  identity or expression, veteran status, or any other legally protected status.

<h2>We are Peak Energy. The first American venture to advance globally proven Sodium-Ion battery systems as the storage standard for the new era of renewable energy on a resilient grid.</h2>

Automation Technician

Role: Automation Technician Location: Sacramento, CA  Department: Manufacturing Operations  Position: Full Time  About Peak Energy Peak Energy Technologies is the first American venture to advance globally proven Sodium-Ion  battery systems as the storage standard for the new era of renewable energy on a resilient grid.  We're a team of about 105 today, growing rapidly as we move from pilot through commercial  scale-up. Our leadership team brings decades of experience from Tesla, Northvolt, Apple,  Powin, and Enovix, and we are backed by Xora, Eclipse Ventures, and TDK Ventures.  About the Role We are looking for an Automation Technician to join our Manufacturing team at our Sacramento  facility, supporting Battery Energy Storage System (BESS) manufacturing automation. This role  starts by helping build out automation equipment — mounting valves and sensors, running  cable, and wiring field devices back to power distribution panels — before shifting into a  sustaining role keeping that equipment running in full production: the first call when automated  equipment goes down, and a technical mentor to a second technician.  The right person is a seasoned, hands-on technician who is equally comfortable building a new  automation cell and troubleshooting one under production pressure, knows when a problem is  theirs to fix versus Controls/Automation Engineering's, and documents either outcome clearly.  Peak Energy is planning a two-shift manufacturing operation; this role covers a single shift and  coordinates with the opposing-shift technician to keep automation running on both shifts.  What You'll Do • Build and install automation equipment: mount and align valves, actuators, and sensors; run  cable and conduit; and terminate field wiring back to power distribution panels per  mechanical and electrical drawings — comfortable around both 24VDC control power and  480VAC three-phase machine supply distribution• Commission new equipment: perform point-to-point IO checks and loop checks, diagnose and  resolve network connectivity issues, assign and configure device IP addresses, and flash  and update PLC and device firmware• Respond to down equipment: serve as first responder to automation failures on your shift,  diagnose root cause using PLC, HMI, and network diagnostics, and restore equipment to  production as quickly and safely as possible• Escalate and document: document equipment assessments, repairs, and downtime root  cause, and escalate issues beyond technician scope to Controls/Automation Engineering  with clear, actionable handoff notes• Guide a second technician: provide day-to-day work direction, technical mentorship, and onthe-job training to a second Automation Technician on shift, ensuring consistent  troubleshooting practices across shifts• Support preventive maintenance: perform and help develop PM routines for PLC I/O modules,  sensors, servo/VFD drives, and pneumatic/hydraulic components to reduce unplanned  downtime• Follow safety procedures: apply lockout/tagout (LOTO), arc flash, and NFPA 70E electrical  safety practices, and maintain safety interlocks and emergency stop circuits on automated  equipment• Track spares and work orders: maintain critical spare parts inventory and log work orders,  downtime, and repairs in the CMMS; support commissioning and FAT/SAT activities  alongside Engineering  What You'll Bring • 5+ years of hands-on experience as an Automation, Controls, or Electrical Technician in an  industrial or manufacturing environment, spanning both equipment build/installation and  sustaining production support• Working knowledge of PLC-based control systems (e.g., Beckhoff TwinCAT, Allen-Bradley, or  Siemens), including IO troubleshooting, network diagnostics, and basic program  monitoring/forcing• Comfortable working safely around 24VDC control power and 480VAC three-phase industrial  power distribution; able to read electrical schematics, wiring diagrams, and panel prints• Proven ability to diagnose and repair mechanical, pneumatic, electrical, and controls issues  on automated equipment under production time pressure• Strong documentation habits and demonstrated ability to guide, train, and direct the work of a  less experienced technician• High school diploma or equivalent required; technical/trade school training or an Associate's  degree in Electronics or Industrial Automation is a plus  Preferred Qualifications• Journeyman or master electrician license• Experience with Beckhoff TwinCAT, Ignition by Inductive Automation, or similar  SCADA/HMI/historian platforms• OSHA 10/30 certification and NFPA 70E arc-flash safety training• Experience supporting battery, energy storage, or other 24/7 industrial manufacturing  environments  Diversity and Inclusion Peak Energy is committed to building a diverse and inclusive workforce. We strongly encourage  women, people of color, and individuals from underrepresented groups to apply. We value skills,  potential, and perspective over specific credentials.  Compensation The salary range for this role is $95,000 - $140,000, with actual pay varying based  on work location, experience, and skills. At Peak Energy, we value our employees and promote  work-life balance. Our competitive benefits package includes unlimited PTO, comprehensive  medical, dental, and vision coverage, a strong 401(k) plan, and equity opportunities.  Equal Employment Opportunity At Peak Energy Technologies Inc., we believe that a diverse and inclusive workplace makes us  a more capable, innovative, and competitive company. Peak Energy Technologies Inc. is an  equal opportunity employer and does not discriminate on the basis of race, color, ancestry,  religion, national origin, sexual orientation, citizenship, marital or family status, disability, gender  identity or expression, veteran status, or any other legally protected status.

Automation Technician

About the Job

About the Company

Peak Energy

Similar Jobs

Automation and Controls Engineer

Automation and Controls Engineer

Automation Engineer (Sacramento)

Automation Engineer (Sacramento)

Maintenance Technician

Maintenance Technician

Equipment Maintenance Technician

Equipment Maintenance Technician

Automation Engineer

Automation Engineer

Automation Engineer

Automation Engineer

Automation & Controls Technician

Automation & Controls Technician

Automation Engineer

Automation Engineer

Equipment Maintenance Technician

Equipment Maintenance Technician

Automation Engineer

Automation Engineer