Working at Freudenberg: We will wow your world!<h1>Responsibilities:</h1>Automation &amp; ControlsProgram, modify, and troubleshoot PLC systems (Allen Bradley / Siemens) to ensure efficient machine operation.Perform diagnostics on control circuits, sensors, and communication networks; implement corrective actions with minimal supervision.Maintain and back up PLC programs and related documentation; assist in control upgrades and integration of new equipment.Electrical &amp; Mechanical SystemsIndependently perform advanced electrical wiring and troubleshooting for 24V, 110V, 220V, and 480V systems, ensuring compliance with NEC and NFPA 70E standards.Diagnose and repair electrical faults, including short circuits, grounding issues, and component failures, minimizing downtime.Execute PMs and rebuilds on motors, drives, and servo systems, maintaining alignment, calibration, and motor performance.Robotics &amp; Automation EquipmentWrite, modify, and optimize programs for robots including calibration and system integration with PLCs, sensors, and vision systems.Perform robot PMs including inspection, cleaning, lubrication, and calibration; ensure motion paths and tool offsets meet production accuracy requirements.Troubleshoot mechanical and electrical faults on robots to minimize cycle loss and improve repeatability.Press and Production EquipmentExecute preventive and corrective maintenance on Rubber Presses (Rep/LWB) and similar hydraulic or servo-driven machines.Calibrate temperature, pressure, and motion profiles to maintain process control and quality standards.Identify and replace faulty sensors, valves, or heating elements; verify system operation post-maintenance.Vision &amp; Quality SystemsTroubleshoot and adjust vision systems used in inspection and automation processes.Support program adjustments and calibration to maintain detection accuracy and reject control.Assist with system integration between vision, robotics, and PLC controls.Technical Documentation &amp; ComplianceAccurately document wiring changes, program modifications, PM results, and repair actions in CMMS.Follow all safety procedures including Lockout/Tagout, arc-flash, and electrical PPE protocols per NFPA 70E.Maintain compliance with all company policies, maintenance procedures, and regulatory standards.Leadership &amp; Continuous ImprovementProvide mentorship to junior technicians through on-the-job training and troubleshooting guidance.Participate in continuous improvement projects targeting OEE, scrap reduction, and equipment reliability.Collaborate cross-functionally with production, quality, and engineering to implement process improvements.<h1>Qualifications:</h1>Technical degree, industrial maintenance certification, or equivalent experience.Minimum 3–5 years of experience in industrial maintenance or automation support, preferably within automotive manufacturing.Technical Proficiency:PLC Programming (Allen Bradley, Keyence) Robotics Programming &amp; Calibration (Fanuc, Moto man, Universal)Electrical &amp; Control Wiring (24V–480V)Servo &amp; VFD Drive ConfigurationHydraulic &amp; Pneumatic SystemsVision Systems (Keyence, Cognex preferred)Reading Electrical Schematics, Diagrams &amp; Prints‎ ‎ The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.Vibracoustic USA Inc.

Freudenberg e-Power Systems is one of the world's leading suppliers of emission-neutral energy systems for heavy-duty applications. With its experience and expertise in battery and fuel cell technology, the company offers tailor-made solutions, in particular combined systems, for sustainable and economical e-mobility. With over 800 employees, Freudenberg e-Power Systems supports its customers from application development through to production, commissioning and service.
The company is part of the global Freudenberg Group, which has four business areas: Seals and Vibration Control Technology, Nonwovens and Filtration, Household Products as well as Specialties and Others. In 2022 the Group generated sales of more than 11 billion euros and employed more than 50,000 associates in around 60 countries.

Plant Maintenance, Operations, Maintenance Specialist

Working at Freudenberg: We will wow your world!<h1>Responsibilities:</h1>Automation &amp; ControlsProgram, modify, and troubleshoot PLC systems (Allen Bradley / Siemens) to ensure efficient machine operation.Perform diagnostics on control circuits, sensors, and communication networks; implement corrective actions with minimal supervision.Maintain and back up PLC programs and related documentation; assist in control upgrades and integration of new equipment.Electrical &amp; Mechanical SystemsIndependently perform advanced electrical wiring and troubleshooting for 24V, 110V, 220V, and 480V systems, ensuring compliance with NEC and NFPA 70E standards.Diagnose and repair electrical faults, including short circuits, grounding issues, and component failures, minimizing downtime.Execute PMs and rebuilds on motors, drives, and servo systems, maintaining alignment, calibration, and motor performance.Robotics &amp; Automation EquipmentWrite, modify, and optimize programs for robots including calibration and system integration with PLCs, sensors, and vision systems.Perform robot PMs including inspection, cleaning, lubrication, and calibration; ensure motion paths and tool offsets meet production accuracy requirements.Troubleshoot mechanical and electrical faults on robots to minimize cycle loss and improve repeatability.Press and Production EquipmentExecute preventive and corrective maintenance on Rubber Presses (Rep/LWB) and similar hydraulic or servo-driven machines.Calibrate temperature, pressure, and motion profiles to maintain process control and quality standards.Identify and replace faulty sensors, valves, or heating elements; verify system operation post-maintenance.Vision &amp; Quality SystemsTroubleshoot and adjust vision systems used in inspection and automation processes.Support program adjustments and calibration to maintain detection accuracy and reject control.Assist with system integration between vision, robotics, and PLC controls.Technical Documentation &amp; ComplianceAccurately document wiring changes, program modifications, PM results, and repair actions in CMMS.Follow all safety procedures including Lockout/Tagout, arc-flash, and electrical PPE protocols per NFPA 70E.Maintain compliance with all company policies, maintenance procedures, and regulatory standards.Leadership &amp; Continuous ImprovementProvide mentorship to junior technicians through on-the-job training and troubleshooting guidance.Participate in continuous improvement projects targeting OEE, scrap reduction, and equipment reliability.Collaborate cross-functionally with production, quality, and engineering to implement process improvements.<h1>Qualifications:</h1>Technical degree, industrial maintenance certification, or equivalent experience.Minimum 3–5 years of experience in industrial maintenance or automation support, preferably within automotive manufacturing.Technical Proficiency:PLC Programming (Allen Bradley, Keyence) Robotics Programming &amp; Calibration (Fanuc, Moto man, Universal)Electrical &amp; Control Wiring (24V–480V)Servo &amp; VFD Drive ConfigurationHydraulic &amp; Pneumatic SystemsVision Systems (Keyence, Cognex preferred)Reading Electrical Schematics, Diagrams &amp; Prints‎ ‎ The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.Vibracoustic USA Inc.

Plant Maintenance, Operations, Maintenance Specialist

About the Job

About the Company

Freudenberg

Similar Jobs

Controls and Electrical Systems Technician

Controls and Electrical Systems Technician

Maintenance Technician

Maintenance Technician

Maintenance Technician

Maintenance Technician

Maintenance Technician

Maintenance Technician

Automation & Controls Technician

Automation & Controls Technician

Maintenance Technician (1st shift)

Maintenance Technician (1st shift)

Maintenance Technician (2nd shift)

Maintenance Technician (2nd shift)

Industrial Maintenance Technician

Industrial Maintenance Technician

Automation & Assembly Process Engineer

Automation & Assembly Process Engineer

Maintenance Technician

Maintenance Technician